• For doors, hoods, trunks
• Multipurpose tape
• Durable long sticking
• Easy to remove

INSTRUCTIONS FOR USE

1. Scuff the surface of the panel to remove excess seal material from the seamed part of the surface.
2. Remove the dust and wipe off the surface clean
3. Apply the sealing tape primer
4. Air dry for approximately 5 minutes at 20ºC.
5. Start at a corner and apply the tape in one direction. Never pull or stretch the tape. Work at a temperature of approximately 10ºC to 20ºC. The tape may lose its adhesive properties at lower temperatures.
6. Carefully check the tape for proper contact, especially at the ends. Use the roller to pressurize the tape. Move the roller in the opposite direction to how you applied the tape.
7. Inspect both ends of the tape
8. Use putty according the specified directions on corners, joints, drains and spot welds.
9. Carefully check the tape for lifting, separation, gaps between tape and panel.
10. Paint.
11. Dry the panel. Do not use temperatures exceeding 70ºC