The product is based on acrylic and cellulose resins, intended for painting bumpers and other external elements of the car body made of plastic. It allows to obtain a fine-grained structure imitating plastic and concealing minor defects of the substrate. It is characterized by a short drying time and good adhesion. The product can be sprayed directly onto plastic surfaces without the need for a primer. The texture may be recoated (sprayed) with paints commonly used for bumpers.
Usage
The best results are achieved by applying the product at room temperature. Room temperature and the temperature of the product should be the same.
Surface must be dry and carefully cleaned from rust, dirt, dust and old paint.
Shake before using for 2 ÷ 3 minutes and try it on a cardboard.
Apply several thin layers from a distance of approx. 20 ÷ 30 cm.
Apply 1 or 2 layers as needed.
Clean the spray nozzle after use! – Hold the can with the valve pointing downward, press the button emptying the content for about 5 seconds.
The product is based on acrylic and cellulose resins, intended for painting bumpers and other external elements of the car body made of plastic. It allows to obtain a fine-grained structure imitating plastic and concealing minor defects of the substrate. It is characterized by a short drying time and good adhesion. The product can be sprayed directly onto plastic surfaces without the need for a primer. The texture may be recoated (sprayed) with paints commonly used for bumpers.
Usage
The best results are achieved by applying the product at room temperature. Room temperature and the temperature of the product should be the same.
Surface must be dry and carefully cleaned from rust, dirt, dust and old paint.
Shake before using for 2 ÷ 3 minutes and try it on a cardboard.
Apply several thin layers from a distance of approx. 20 ÷ 30 cm.
Apply 1 or 2 layers as needed.
Clean the spray nozzle after use! – Hold the can with the valve pointing downward, press the button emptying the content for about 5 seconds.
The product is based on acrylic and cellulose resins, intended for painting bumpers and other external elements of the car body made of plastic. It allows to obtain a fine-grained structure imitating plastic and concealing minor defects of the substrate. It is characterized by a short drying time and good adhesion. The product can be sprayed directly onto plastic surfaces without the need for a primer. The texture may be recoated (sprayed) with paints commonly used for bumpers.
Usage
The best results are achieved by applying the product at room temperature. Room temperature and the temperature of the product should be the same.
Surface must be dry and carefully cleaned from rust, dirt, dust and old paint.
Shake before using for 2 ÷ 3 minutes and try it on a cardboard.
Apply several thin layers from a distance of approx. 20 ÷ 30 cm.
Apply 1 or 2 layers as needed.
Clean the spray nozzle after use! – Hold the can with the valve pointing downward, press the button emptying the content for about 5 seconds.
