DX86 Duxone Spray Putty 1.389KG1.389 kg
Available in stock (11)
What it’s used for
DX86 is typically applied to:
- Sand scratches in body filler
- Small waves or pinholes
- Fibreglass surfaces (GRP)
- Repair refinements before primer
It helps create a perfectly smooth surface before high-build primer and paint.
Key characteristics
- 🎯 Spray-applied (pistolable) instead of spread by hand
- 🧱 Good filling power for small imperfections
- 🧼 Easy to sand once cured
- 🚫 Controlled viscosity to avoid heavy runs/sagging
- 🧪 2K system (needs activator/hardener)
Where it fits in the Duxone system
Think of the repair stack like this:
- Body filler (DX80 / DX84)
- DX86 spray putty (fine levelling stage)
- Primer surfacer (DX62 / DX64)
- Basecoat + clear
So DX86 is a finishing filler layer before primer, not a primer itself.
When you’d use DX86
- After sanding body filler but still seeing minor defects
- When you want a faster, more uniform finish than hand-glazing
- On fiberglass panels or repaired areas needing refinement

